Congratulations if you recently purchased a new set of hearing aids! Hearing aids have been demonstrated to enhance memory and brain function in older people in addition to improved listening.
Even while wearing hearing aids has numerous advantages, we are also aware of how expensive they can be. It’s crucial to put and take off your hearing aids correctly if you want to get the most out of your investment.
Here are some pointers on how to put hearing aids in and how to remove hearing aids. Soon, putting and removing your hearing aids will come naturally to you.
Tips for Inserting and Removing Your Hearing Aids
Insert your right hearing aid using your right hand. That also applies to your left.
To clearly see what you’re doing, use a mirror.
The red and blue marks on the gadget let you distinguish between the right and left hearing aids. The right is represented by red, and the left by blue.
For an optimal fit and hearing experience, keep your hearing aids clean.
How to Put in and Remove Receiver-in-Canal (RIC) and Behind-the-Ear (BTE) Hearing Aids
Because BTE and RIC hearing aids differ slightly from one another in terms of brand, model, and appearance, you might need to modify them. We’ll go over how to insert and remove RIC and BTE hearing aids in the sections below. To give you a better understanding of how each type of hearing aid should be used, we’ve also included pictures of proper positioning. Just keep in mind that every brand and style will differ slightly!
Inserting Receiver-in-Canal (RIC) Hearing Aids
Make sure you take out any items that may be tucked behind your ear before starting to insert your RIC hearing aid, including any eyeglasses you may be wearing.
Hold the hearing aid’s top in place with your thumb and index finger.
Next, put the hearing aid behind your ear like you would a pair of spectacles by sliding it over the top of your ear.
On the front of your ear, the wire and the dome now should be dangling. Grip the dome with your thumb and index finger, then insert it into your ear canal.
Next, gently press the dome in your canal with your index finger. To further press the dome in, move your finger in little circular motions. When you put your BTE hearing aid in, you shouldn’t feel any pain or discomfort. If you do, seek advice from a hearing care specialist.
Quick note: A personalized earmold may have been chosen by you and your audiologist. If this is the case, pulling down on your earlobe may be useful as you press in a circular motion to seat the earmold.
When the wire at the top of your ear has vanished against the front of your ear and is flush with your head, the dome will be securely in place inside your ear.
A stabilizer, which is a slender plastic arm linked to the speaker between the dome and the wire in new hearing aids, will stick out straight across your earlobe. Put the wire into your ear’s bowl using your thumb and index finger. Regular wear will cause the stabilizer wire to naturally tuck within the bowl of your ear and conform to the curvature of your ear.
When wearing your RIC hearing aid properly, you shouldn’t be able to see it when gazing in the mirror at yourself directly.
Inserting Behind-the-Ear (BTE) Hearing Aids
BTE hearing aids are extremely similar to RICs, with the exception that a thin plastic tube is used in place of the wire in the RIC. You can use the above instructions because the insertion procedure is practically the same. Just be careful when inserting the dome or earmold in your ear not to kink the tube.
Removing RIC and BTE Hearing Aids
Remove the hearing aid’s top from behind your ear using your thumb and index finger.
To get the dome out of your ear canal, gently tug on it.
To prolong the life of your batteries after removing the hearing aid, open the battery door.
So, this is how to put hearing aids in. For quality hearing aids, you can get in touch with Healthy Hearing Club.